Randy S. Hager,
I would stay to about 204 degrees duration @ .050
.440-.480 or so lift,w/a 114-116 lobe center.
Comp Cams are good cams.
They will make what you want.
For a turbo,,, A T3/T4 60-1 Turbonetics w/a Stage five wheel,,,& a .63 turbine housing.
That would be good to about 24 psi tops.
Or a T3/T4 57 trim compressor wheel. .63 turbine housing.
With those turbos on Ebay,you have to watch out for the small turbine housings & turbine wheels.
Most it seems are geared for small 4 cyl stuff.
It really depends on how much boost you want to run?
Two cents
MBHD
