ok guy's, i went out in the shop and got the cam card. here are some spec's. lift is .521 int and .512 exh. dur @.050 is 218 int and 212 exh. lsa is 114. valve timing @ .050 is open int -1 btdc, exh 44 bbdc, timing close @ .050 int 39 abdc, exh -12 atdc. these specs are for the cam installed at 110 deg intake center line. i am running it straight up on the cam gear/timing marks. so far i have not reved this engine past 4500 rpm, at that level it is still pulling very strong.
turbo 6, what cam profiles have worked good for you and at what rpm levels?
