Inliners International Forums General Discussion Hi Performance 74 nova w/250

anyone know of a great cam for the 250 and possibly some roller rockers to go with it?

jack

secondly, anyone know the name of the company that makes the instrument panel that you can put your own guages in or they sell it complete with guages?

thanks

That is a Big open Question Jack. Comps has a nice set of roller rockers So does crane and many others. You can also run the Chevy BB rockers which are 1.7sI used to run the crane gold rockers Now I have comps Pro magnums 1.73s and No trimming needed.and as far as a cam goes what are your plans I can set you up with a full List.Or I can get you a Nice deal on a regrind IF you don't have a problem with reground cams. Hope this helps
}[oooooo]

I think there's a fair number of companies who make gauge clusters (3 or 4 gauges together). Try summit or another supply to find the bigger names and then hit their websites.

sorry, i needed to be more clear in the fact that the cluster is vehicle specific.


Twisted,

a regrind is fine. I already put a 2600 stall b&m in her to prepare for the battle and I am also getting the offy 4bbl intake., as well as headers.

twisted, are these the rockers you have?


eBay item: small block chevy COMP CAMS magnum roller rocker arms (#7960276764)



jack

Jack
the rockers I have are the Pro magnum These are a full roller rocker. The ones Your looking at on Ebay are not They are Like the Stock rocker with the filcum ball. Hope this helps }[oooooo]

Jack,

A neat trick from back in the day is to get a handful of the stock clock bezels for the top of your '50 dash. Mounted side by side atop the dash we used to put Stewart Warner ( or any other brand 2 1/16" gauges ) into them. It's been a few years so I don't recall if they are an exact bolt in to the bezels or not but I seem to remember they are. Obviously this is an Old School thing and may not suit your needs but I thought I'd pass it along just in case.

Just say NO to billet,
Mike

Item number: 7961732819

check these out.... just bought them for 139.00

secondly, anyone know the name of the company that makes the instrument panel that you can put your own guages in or they sell it complete with guages?

Check this out
http://covansclassic.com/

Nice Deal jacks50
}[oooooo]

Larry, I just left mike @ ravenswood and let me tell you....He was the one that i purchased the rockers from and he has the beautiful rocker covers and side plates.!!! I need to get the newsletter...How do I get it????

We need to meet up for lunch some weekend...just to chat. Mike speaks very highly of you.

thanks,

jack

Yes Jack I know who you bought them from I seen that On Ebay.Plus I did speak with him this morning. I'm guessing your talking about the Engine stuff? I need your address to mail you a copy&member form of the 12port. I will drop you a line later. with my Email. Thank you }[oooooo]